某型导发架通用测试系统软件复用性设计

测试软件的复用性是摆在测试界面前亟待解决的重要问题。运用统一建模语言(Unified Modeling Language,UML)对测试软件进行建模,包括:测试系统的类图、软件功能分解、功能子系统的上下文模型、测试软件需求特征树以及软件功能子系统的顺序交互视图。在Visual C++6.0环境中,采用"应用程序框架+可复用构件"开发方式,实现了基于可复用构件的某型导发架测试系统应用软件组装,成功解决了导发架测试领域内同一系列产品间测试软件的可复用问题。     

利用RLC电路合成高压方波脉冲

基于过阻尼RLC电路分时放电,提出了一种新型高压方波脉冲产生方法。理论分析表明过阻尼RLC电路产生的双指数电压波与PFL产生的方形电压波具有类似的上升沿和平顶。电路模拟表明通过人工过零技术可以对双指数电压波进行截尾,从而形成完整的高压方波脉冲。建立了原理验证性样机,由两组RLC电路构成,每组电路包含一台400 nF脉冲电容器和一只三电极场畸变气体开关,两组电路共用一个上升沿调节电感。实验证明样机可以在250 Ω电阻负载上输出幅值17 kV,平顶宽度330 ns~5.8 μs,上升沿100~ 350 ns 的单极性高压方波脉冲。该方法适应性强,对负载变化不敏感,同时具有良好的可调节性,方波上升沿、平顶宽度连续独立可调。     

Designing a screening experiment for highly reliable products

Within a reasonable life‐testing time, how to improve the reliability of highly reliable products is one of the great challenges to today's manufacturers. By using a resolution III experiment together with degradation test, Tseng, Hamada, and Chiao (1995) presented an interesting case study of improving the reliability of fluorescent lamps. However, in conducting such an experiment, they did not address the problem of how to choose the optimal settings of variables, such as sample size, inspection frequency, and termination time for each run, which are influential to the correct identification of significant factors and the experimental cost. Assuming that the product's degradation paths satisfy Wiener processes, this paper proposes a systematic approach to the aforementioned problem. First, an intuitively appealing identification rule is proposed. Next, under the constraints of a minimum probability of correct decision and a maximum probability of incorrect decision of the proposed identification rule, the optimum test plan (including the determinations of inspection frequency, sample size, and termination time for each run) can be obtained by minimizing the total experimental cost. An example is provided to illustrate the proposed method. © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 514–526, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/nav.10024     

紧凑型Tesla变压器的参数测量

对设计加工研制的Tesla变压器,根据Smith建议的测量方法,解决了对紧凑Teala变压器耦合系数进行比较准确地测量的问题,实测耦合系数高达0.9,并对耦合系数稍低于理论设计值的原因进行了探讨,同时分析给出了物理原因.此外,根据Teala变压器电路在初次级初、次级短路和低电压充电情形下的实测电压波形,估算出Tesla变压器电路各参数数值.这些数值与理论计算值吻合,并能满足实际高压充电的要求.     

内埋式导弹武器安全分离地面试验关键技术

内埋式机载导弹武器在发射过程中需经历复杂发射控制过程,为验证内埋弹射发射安全分离技术,提供了一种地面验证试验方法,给出了试验设计方案,将试验划分为综合对接与地面分离验证两部分,设计了综合对接试验系统,给出了导弹模拟装置原理及组成;设计了地面分离验证系统,讨论了内埋武器舱遮挡导弹遥测信号问题解决办法及试验数据录取方法,设计了试验验证序号流程,为内埋弹射导弹武器发射过程地面验证提供一种技术手段。     

Two‐stage component test plans for testing the reliability of a series system

A system reliability is often evaluated by individual tests of components that constitute the system. These component test plans have advantages over complete system based tests in terms of time and cost. In this paper, we consider the series system with n components, where the lifetime of the i‐th component follows exponential distribution with parameter λ_i. Assuming test costs for the components are different, we develop an efficient algorithm to design a two‐stage component test plan that satisfies the usual probability requirements on the system reliability and in addition minimizes the maximum expected cost. For the case of prior information in the form of upper bounds on λ_i's, we use the genetic algorithm to solve the associated optimization problems which are otherwise difficult to solve using mathematical programming techniques. The two‐stage component test plans are cost effective compared to single‐stage plans developed by Rajgopal and Mazumdar. We demonstrate through several numerical examples that our approach has the potential to reduce the overall testing costs significantly. © 2002 John Wiley & Sons, Inc. Naval Research Logistics, 49: 95–116, 2002; DOI 10.1002/nav.1051     

新型静电电位动态测试系统的研制

该测试系统主要依据接触式测试法和电压转换测试原理进行测试。通过对该系统的高压线性和频率特性进行校准,达到了设计要求。对人体静电电位进行测试实验,结果显示该测试系统运行稳定,响应速度快,测试数据准确,并可自主进行数据换算和存储。     

基于D矩阵的舰船电子装备综合诊断方法

针对舰船电子装备综合诊断实现要求,提出一种基于故障-测试依赖性关系(D)矩阵的综合诊断方法,利用同一D矩阵分别完成对舰船电子装备的测试性分析评估、测试诊断需求分配、诊断测试序列生成和诊断信息的共享,实现舰船电子装备综合诊断各过程诊断信息模型的一致.该方法已在某舰载电子装备综合诊断实现中得到验证和应用.     

辅助决策软件综合试验系统TTS－Ⅱ

ＴＴＳ－Ⅱ是一个基于Ｎｏｖｅｌ网的分布式处理系统,它能够一体化地完成舰用Ｃ２系统辅助决策应用软件全生命周期（开发、试验及维护等）试验任务。本文扼要介绍了系统体系结构、主要软件工具以及系统的性能特点     

VLSI与电子系统的层次化可测性设计

论述了一种对电子系统VLSI自顶向下的层次化自动化测试方法及层次化自测试的概念和相应的可测试性设计结构,并讨论了数模混合集成电路的可测试性设计问题。